Select Category
_0x200.jpg)
Attwood Casting Seat, Gray - 98505Gy - 23-98505Gyf1
Ergonomic foam padding Durable high impact plastic base (no wood)Fits all standard seat mountsUniversal 5" x 5" (12.7 cm x 12.7 cm) mounting pattern
Attwood Clamp-On Portable LED Light Kit - RealTree® Max-4 Camo
Attwood Clamp-On Rail Base For Sure Grip Rod Holder - 1159341 - 23-50743F1
Fit a variety of mounting surfaces including rails. Constructed of extruded aluminum.
Attwood Cleat Cast Aluminum 4-1/2" - 12121-3 - 23-121213F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Cast Aluminum 6" - 12125-3 - 23-121253F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Cast Aluminum 8" - 12127-3 - 23-121273F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Hollow Base 6" - 66009L6 - 23-66009L6F1
Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Cleat Hollow Base 8" - 66010L3 - 23-66010L3F1
Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Cleat Nylon 6-1/2" - 12112-1 - 23-121121F1
Corrosion-resistant economical cleat Two holes for required fastenersUV-resistant
Attwood Collector Box For 1423,1424,1425,1426,1494,1496A - 1341-1 - 23-13411F1
Cut-outs for two 3' I.D. hoses. Corrosion-resistant plastic. For use w/plastic venturi, flush louvered, or trimline vent.
Attwood Collector Box For 1495 Vent - 1345-1 - 23-13451F1
Use with plastic louvered vent, with two 3" I.D. wire supported ventilation hoses. Box fastens to vent with screws or pop rivets, vent then fastens to the deck. Corrosion-resistant plastic.
Attwood Cowl Ventilator 6" - 1364A3 - 23-1364A3F1
Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Chrome-plated zinc. Flange is non corrosive plastic. Installs with #8 fasteners.
Attwood Deck Fill f/Carbon Canister System - Angled Body & Scalloped Black Plastic Cap
Attwood Deck Fill f/Carbon Canister System - Angled Body & Scalloped Chrome Cap
Attwood Deck Fill f/Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap
Attwood Deck Fill f/Carbon Canister System - Straight Body & Scalloped Chrome Cap
Attwood Deck Fill f/Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap
Attwood Deck Fill f/Pressure Relief Systems - Angled Body & Scalloped Black Plastic Cap
Attwood Deck Fill f/Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap
Attwood Deck Fill f/Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap
Attwood Deck Fill Replacement Cap For 66126, Stainless Steel - 66061-3 - 23-660613F1
316 Stainless Steel. Attached with stainless steel beaded chain.
Attwood Deck Fill Replacement Cap For 66406, 66408, 66408C1, Stainless Steel - 66074-3 - 23-660743F1
316 Stainless Steel. Attached with stainless steel beaded chain.
Attwood Deck Fills f/Pressure Relief Systems - Straight Body - Scalloped Black Plastic Cap
Attwood Deck Plate 6" White - 12792-1 - 23-127921F1
Allows additional storage options to your canoe, kayak or small boat access unusable spaces and for inspection of and general access to valves and deck vents. Easy opening, screw-out design - no tools required. High-impact ABS plastic with textured surface. Durable, rugged, weather-resistant. Flange is pre-drilled for #8 screws.
Attwood Deluxe Anchor Lift 'N Lock Control - 13702-4 - 23-137024F1
High impact, reinforced nylon anchor lift and pulley with stainless steel shaft and protective black cover. Easy pull up, lock and release. Supports up to a 20 lb. anchor with 1/4" to 7/16" diameter rope.
Attwood Deluxe Boat Cover Support System For Boats Up To 19' - 10795-4 - 23-107954F1
One of the best cover support systems on the market. Easily adjustable boat cover support keeps water from accumulating in center of cover. Extends the life of the cover by as much as 50%.Telescoping center pole (28" - 48"), poly web straps, and bow spreader form a double ridge line under the cover. Pole rests on a rubber foot and the web straps attach to the stern with non-marring hooks. Aluminum pole: 1" diameterPoly web straps: 1" wide, black
Attwood Door Hinge Cast Stainless Steel 4"L X 1-1/2"W (Pair) - 66029-3 - 23-660293F1
Cast stainless steel w/six holes.
Attwood Double Braid Mfp Dock Line, 3/8" X 15', Blue - 11702-7 - 23-117027F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel with one end spliced.
Attwood Epa Compliant Fuel Tank, 12 Gal. W/O Gauge - 8812Lp2 - 23-8812Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Epa Compliant Fuel Tank, 3 Gal. W/O Gauge - 8803Lp2 - 23-8803Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Epa Compliant Fuel Tank, 6 Gal. W/O Gauge, 2 Pack - 8806Lp2 - 23-8806Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.Priced individually, sold in packs of 2 only.
Attwood Extension Aluminum 16" Threaded - 2164-T - 148-2164Tf1
Fixed height 3/4" pin post. 1.5" diameter brushed aluminum posts. Steel pin.
Attwood Fender, 4" X 16", Blue - 9354Bd1 - 23-9354Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 4" X 16", White - 9354D1 - 23-9354D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", Blue - 9355Bd1 - 23-9355Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", White - 9355D1 - 23-9355D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", Blue - 9356Bd1 - 23-9356Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", White - 9356D1 - 23-9356D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", Blue - 9358B1 - 23-9358B1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", White - 2723981 - 23-93581F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fixed Height Ski Pylon 45" , Post Diameter 1-1/2", Stainless Steel - 903-009-S - 148-903009Sf1
Pro swivel 360° rotating head with nylon bushing for smooth pulling Stainless steel armsThreaded stainless steel flush mount base
Attwood Flat Gas Spring Mounting Bracket Ball Pem Forward 2 Holes Stainless Steel - Sl40Ssp3-7 - 23-Sl40Ssp37F1
Mounting bracket: pem type: Ball 10mm. direction forward.
Attwood Flexible Grab Handle - 58927 - 23-20615F1
Flexible grab handles for flush, flexible mounting. They can be mounted to a variety of irregular surfaces and angles on swim platforms, cockpits and companionways. Constructed from soft polypropylene webbing over a semi-rigid core. Available with or without an over-molded grip. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might impact them. They meet the ABYC H-41 standard for strength: withstand a load of 400 lbs. in any direction. All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.
Attwood Flush Base For Sure Grip Rod Holder - 1158245 - 23-50713F1
Fit a variety of mounting surfaces including rails Constructed of extruded aluminum
Attwood Flush Cleat 4-1/2" - 66512-7 - 23-665127F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2", Counter-Sunk - 66510-7 - 23-665107F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 6" - 66516-7 - 23-665167F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 8" - 66524-1 - 23-665241F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Hinge, Square End, Stamped Stainless Steel 2-3/4" X 1-9/16" - 66239-3 - 23-662393F1
Unique double stud design allows for a flush installation while providing a full 180° swing. This makes them the perfect hinge for lazzerette or fish box covers in the cockpit sole. Made of solid stamped stainless steel.
Attwood Flush Mount Transom Light Round - 6356D7 - 23-6356D7F1
Stainless steel with plastic body and watertight lamp socket. Provide 2-mile visibility for craft up to 164' in length. 7-1/2 watt lamp and two stainless steel #10 screws included. Model 6356 has a translucent back so it can also be used to light an interior compartment. Uses #90 replacement bulb.
Attwood Fold Down Aluminum Dock Cleat, 6" - 12048-4 - 23-120484F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Down Aluminum Dock Cleat, 8" - 12049-4 - 23-120494F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Up Drink Holder Black - 199241 - 23-24457F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Drink Holder White - 200702 - 23-24497F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Trailer Jack, 1000 Lb. - 23-111274 - 23-111274F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fold Up Trailer Jack, 1500 Lb. - 11126-4 - 23-111264F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fold-Down Incandescent Anchor/Masthead Light - 20" Horizontal Composite Base - 12V
Attwood Fold-Up Trailer Jack - 1000 lb Capacity - Single Wheel
Attwood Fold-Up Trailer Jack - 1500 lb Capacity - Dual Wheel
Attwood Frosted Globe All-Around Pole Light w/2-Pin Locking Collar Pole - 12V - 36"
Attwood Fuel Connector For Chrysler/Force Nickel Plated Brass 5/16" Barb - 2551008 - 23-88846F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Molded Acetal 3/8" Barb - 2556851 - 23-89006F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 1/4" Npt - 2557216 - 23-89016F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 3/8" Barb - 2557581 - 23-89026F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 1/4" Npt - 14530-6 - 23-145306F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 3/8" Barb - 14534-6 - 23-145346F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector Universal, Brass For 3/8" Hose, 1/4" Npt - 14540-6 - 23-145406F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Attwood Fuel Line Hose Kit 3/8" X 6' For Evinrude - 93806Elp7 - 23-93806Elp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' For Mercury 1998 And Older - 93812Ulp7 - 23-93812Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' For Yamaha - 93806Ylp7 - 23-93806Ylp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Evinrude - 93806Eusd7 - 23-93806Eusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Mercury - 93806Musd7 - 23-93806Musd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' - 93806Ulp7 - 23-93806Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' With Fuel Demand Valve And Sprayless Connector - 93806Uusd7 - 23-93806Uusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit Universal 5/16" X 6' - 951606Ulp7 - 23-951606Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Force 3/8" X 6' - 93806Fus7 - 23-93806Fus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Honda 3/8" X 6' - 93806Hus7 - 23-93806Hus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Mercury Pre 1998 3/8" X 6' - 93806Aus7 - 23-93806Aus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
