Select Category

Brush Kit Mc 710-75384 - 18-5697 - 47-5697F1

Brush Holder Assembly - Sr380 - 57-Sr380F1

Brush Display Poly Asst. - Pb1 - 211-Pbdf1

Display includes: 12 ea. of sizes 1", 2", 3" and 4" brushesThrow-away applicators, for all smooth surfaces. Ideal for application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer. Leaves no brush marks or loose bristles. Rollers fit all standard holders. Has less spatter and a smoother finish.

Brush Cleaner Quart - 50804 - 373-050804F1

Removes dried paint, shellacs, varnishes and lacquer from natural and nylon brushes. Water rinsable. Contains lanolin. Not used for synthetic brushes other than nylon. Does not contain methanol alcohol.

Brush Cleaner Carb Approved - Gbc12C - 986-Gbc12Cf1

Cleans natural and synthetic bristle brushes, roller covers, trays, and equipment after a project. Removes hardened latex and oil-based paint, enamel, varnish, shellac, lacquer, and polyurethane to leave tools looking like new. Sold in Case Packs Only

Brush - Stn-Brush - 221-Brushf1

2 part cleaning system is the easy and affordable way to recondition your teak. The 2 step process removes old sealers, soil, mildew, fuel, fish blood and many other hard to remove stains without the hassle and expense of sanding.Quart Kit contains one quart each of formula 1 and 2, plus two plastic bristle scrub brushes.

Brownell Wood Blocking 8" X 8" X 22" - B8 - 302-B8F1

Made from Pine. Brownell recommends a minimum of two blocking piles placed on hard, stable ground to carry the boat's weight. Each blocking pile consists of four blocks.

Brownell Wood Blocking 6" X 6" X 22" - B6 - 302-B6F1

Made from Pine. Brownell recommends a minimum of two blocking piles placed on hard, stable ground to carry the boat's weight. Each blocking pile consists of four blocks.

Brownell Wood Blocking 12" X 12" X 22" - B12 - 302-B12F1

Made from Pine. Brownell recommends a minimum of two blocking piles placed on hard, stable ground to carry the boat's weight. Each blocking pile consists of four blocks.

Brownell Sdr4 4-Unit Stern Drive Rack - Sdr4 - 302-Sdr4F1

Maximizes shop efficiency. Measures just 49" x 24" x 22". All of the contact surfaces are coated with rubber to prevent scratching and the heavy duty steel has been protected with our traditional painted blue surface for long-lasting durability. Features 5" swivel castors with brakes for easy maneuverability.

Brownell Sdr1 Single-Unit Stern Drive Rack - Sdr1 - 302-Sdr1F1

Maximizes shop efficiency with this small, easily maneuverable method for moving the stern drive. Only 24"L x 22.5"W x 17"H, the SDR1 stores easily when not in use. All of the contact surfaces are coated with rubber to prevent scratching and the heavy duty steel has been protected with our traditional painted blue surface for long-lasting durability. Load Capacity: 500lbs (227kg)Weight: 53lbs (24kg)

Brownell Scd1 Pwc / Small Craft Dolly - Scd1 - 302-Scd1F1

Designed to easily transfer personal water craft, dinghies and other small craft to and from the water, protected with our traditional painted blue finish. The frame features an easily adjustable width and the heavy duty American made construction can support up to 2,000 pounds or 900 kilograms.

Brownell Pd2X Pontoon Dolly, 15"H - Pd2X - 302-Pd2Xf1

4" phenolic castersFoam padded top for maximum protectionPD2 & PD2X can be combined on tritoons w/different height pontoonsWeight: 47 lbsMade in America

Brownell Pd2B Pontoon Dolly W/Brakes, 2/Pk - Pd2B - 302-Pd2Bf1

Brownell Boat Dollies are heavy duty and designed for use in showrooms, workshops, boat shows and even production facilities. The PD2 is our Pontoon Dolly, which is designed to easily transfer pontoons both to and from the water, protected with our traditional painted blue finish. The frame is 19 x 19 x 5 inches / 48.25 x 48.25 x 13 centimeters and features 4-inch, non-marking phenolic casters. If desired, you can opt for your dollies to have brakes on all three casters. A foam padded top has been added for maximum protection for your water craft.

Brownell Pd2 Pontoon Dolly, 5"H - Pd2 - 302-Pd2F1

4" phenolic castersFoam padded top for maximum protectionPD2 & PD2X can be combined on tritoons w/different height pontoonsMade in America

Brownell Opad Ground Pad, 6/Pk - Opad - 302-Opadf1

Brownell Ground Pads are the ideal accessory to our Sailboat Stands. Use on gravel or soft ground to prevent the stands from sinking in. These will also help to prevent damage to paved surfaces. Finally, they will extend the life of your stands by elevating them above standing water which may cause rust. The pads measure 6" x 6" (15x15cm) and made of 1/2" plywood.

Brownell Obr2 Large Outboard Rack/Dolly - Obr2 - 302-Obr2F1

A safe and secure solution for moving the industry's largest outboards around the shop or showroom. With a stable floorprint and top quality casters, the OBR2 has a 1,200 pounds capacity and is perfect for handling larger outboards. Precut mounting plates provide fast and easy mounting, Storage tray and ample hanging points to keep the engine and rigging together. Ergonomic handles, swivel and stationary casters provide ease of movement. Caster lock for safe storage.

Brownell Ks28 Galvanized Base Only - Ks28Gbase - 302-Ks28Gbasef1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel. KS28 is stackable to save space when not in use.

Brownell Ks28 Base Only - Ks28Base - 302-Ks28Basef1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.

Brownell Ks1Gbase Ks1 2' Keel Stance Base Only - Ks1Gbase - 302-Ks1Gbasef1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.

Brownell Ks1F Keel Stand W/Flat Top - Ks1F - 302-Ks1Ff1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.

Brownell Ks1 Base Only - Ks1Base - 302-Ks1Basef1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.KS1 is stackable to save space when not in use.

Brownell Keel Stand W/V-Top - Ks28V - 302-Ks28Vf1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.KS28 is stackable to save space when not in use.

Brownell Keel Stand W/V-Top - Ks1 - 302-Ks1F1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.KS1 is stackable to save space when not in use.

Brownell Keel Stand W/Flat Top - Ks28F - 302-Ks28Ff1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.KS28 is stackable to save space when not in use.

Brownell Keel Stand W/Flat Top - K4 - 302-K4F1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.

Brownell K4Vtop K4 Keel Stand V-Top - K4Vtop - 302-K4Vtopf1

Solid ACME threaded rod, adjustable under load. Unthreaded bottom for safety. Durable steel handle.

Brownell K4 Base Only - K4Base - 302-K4Baseonlyf1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.

Brownell Galvanized Sailboat Stand, Flat Top - Sb4Galv - 302-Sb4Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Sailboat Stand, Flat Top - Sb3Galv - 302-Sb3Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Sailboat Stand, Flat Top - Sb2Galv - 302-Sb2Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Sailboat Stand, Flat Top - Sb1Galv - 302-Sb1Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Sailboat Stand, Flat Top - Sb0Galv - 302-Sb0Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Power Boat Stand, Flat Top - Mb4Galv - 302-Mb4Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Power Boat Stand, Flat Top - Mb3Galv - 302-Mb3Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Power Boat Stand, Flat Top - Mb2Galv - 302-Mb2Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Power Boat Stand, Flat Top - Mb0Galv - 302-Mb0Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Galvanized Keel Stand With V Top - Ks28Gv - 302-Ks28Gvf1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.KS28 is stackable to save space when not in use.

Brownell Galvanized Keel Stand With Flat Top - Ks28Gf - 302-Ks28Gff1

Alternative to traditional wood blocks. Saves time and labor versus cribbing. Adjust the acme threaded top to the precise height required. 20,000 pounds SWL. Made in USA with American steel.KS28 is stackable to save space when not in use.

Brownell Galvanized Boat Stand - Mb1Galv - 302-Mb1Galvf1

Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out. 20,000 pounds safe working load.

Brownell Br37 Boat Stand - Br37 - 302-Br37F1

Display system for showroom or shop designed for boats up to 35,000 pounds. Use 2-3 stands per boat according to builders specification. TLC pads won't scratch the hull. Hot-dip galvanized steel with solid acme threaded adjustment. Adjustable height 19-28"

Brownell Bl8Air Air Powered Boat Lift - Bl8Air - 302-Bl8Airf1

Air over hydraulic operation allows one person to operate four lifts simultaneously with a standard (not included) manifold25' Air Hose IncludedRecommended air supply 120 PSI with minimum 20-gallon storage tankSWL 8,000 lbs. (3628 kgs) per jackPowered by hydraulic jacks for smooth and easy operationSafety Pins for added protectionNo-flat tires and hand grip for easy mobilityAdjustable base and arm with two arm positionsFull capacity for entire lifting range 18" - 64"Capacity at horizontal extension: 8,000 lbs. at 10", 6,000 lbs. at 14", 4,000 lbs. at 18"FULL SYSTEM IS FOUR JACKS (sold individually)

Brownell Bl8 Hydraulic Boat Lifting System - Bl8 - 302-Bl8F1

Strongest and most versatile lift available SWL 8,000 lbs. (3628 kgs) per jackPowered by hydraulic jacks for smooth and easy operationSafety Pins for added protectionNo-flat tires and hand grip for easy mobilityAdjustable base and arm with two arm positionsFull capacity for entire lifting range 18" - 64"Capacity at horizontal extension: 8,000 lbs. at 10", 6,000 lbs. at 14", 4,000 lbs. at 18"Complete system is 4 jacks (sold individually)

Brownell Bl3 Hydraulic Boat Lifting System - Bl3 - 302-Bl3F1

Powered by hydraulic jacks for smooth and easy operation Complete system utilizes four jacks (sold individually)Adjustable base and armSafety pins for added protectionNo-flat 10" tires and hand grip for easy mobilityLifting range 20" - 50" (51 cm - 127 cm)Weight: 263 lbs. (120 kgs)

Brownell Bd4Poly Bunk Dolly W/Poly Wheels - Bd4Poly - 302-Bd4Polyf1

Maximum capacity 4,000 lbs (1,814 kgs)Adjustable width 31" to 42"Recommended Bunk: 4" x 10", maximum length 8'Swivel casters with brakes

Brownell Bd3 Extra Heavy Duty Boat Dolly - Bd3 - 302-Bd3F1

6,000 pound capacity per dolly; 2 dollies will safely support a 12,000 pound boat Adjustable width: 51"-77"Adjustable pad height: 29"-33"6" phenolic wheels with brakesOptional connector bar available (BD3BAR12)Weight: 185 lbsMade in America

Brownell Bd1 Maxi Heavy Duty Boat Dolly - Bd1 - 302-Bd1F1

Low profile dolly with our traditional painted blue finish Adjustable width of 55"-91"Adjustable height of 29"-46"8" x 2" Phenolic casters with brakes

Brown3/Pack Momemtary Switch Bell Rv Replaces P/N 681-G114U - Dgg114Upb - 681-Dgg114Upbf1

Brophy Weight Distributing System Hitch Bar - Dsb9 - 138-Dsb9F1

Includes solid shank 2" hitch bar and all hardware needed. Dual sway control provisions.Does not include hitch ball.

Brophy Weight Distributing System Hitch Bar - Dsb7 - 138-Dsb7F1

Includes solid shank 2" hitch bar and all hardware needed. Dual sway control provisions.Does not include hitch ball.

Brophy Trailer 5/16" Safety Chain, 4' Long - Tcl3I - 138-Tcl3If1

Trailer safety chain with 2 latch "S" Hooks. These hooks have a safety latch to meet California towing requirements. Designed to keep trailer connected to vehicle if hitch fails or comes uncoupled. Brite zinc finish. Overall length is 51". This grade of chain is designed for trailer safety chain applications only. Not for overhead lifting.

Brophy Tdsf Stake Pocket Camper Tie Down, Black Powder Coated Finish, 4/Pk - Tdsf - 138-Tdsff1

Designed for full-size pickups Three removable spacer tabs allow custom fit for most pickupsMounts permanently in stake tube for a tie down that is smart in appearance and always ready to useTab lock anchors tie down to truck rail to prevent lifting and twistingFor campers up to 8'Warning: Not for use on '88 or newer Chevrolet and GMC trucks. 4 per box.

Brophy Tdhp Tie Down Hardware Package, 4/Pk - Tdhp - 138-Tdhpf1

Includes four 3/8" turnbuckles, four "S" hooks and four chains. 3,000 max capacity per set.

Brophy Tdbp Stake Pocket Camper Tie Down, Bright Zinc Plated Finish, 4/Pk - Tdbp - 138-Tdbpf1

Designed for full-size pickups Three removable spacer tabs allow custom fit for most pickupsMounts permanently in stake tube for a tie down that is smart in appearance and always ready to useTab lock anchors tie down to truck rail to prevent lifting and twistingFor campers up to 8'Warning: Not for use on '88 or newer Chevrolet and GMC trucks. 4 per box.

Brophy Receiver Hitch Stair, 2-Step - Rhs2 - 138-Rhs2F1

Strong and convenient Economical stair for camper entryThree adjustable lengths: 1/2", 3-1/2" & 6-1/2" (back of top step to hitch pin holes)No assembly requiredEasily slides into any 2" receiver and securely locks into place with any 5/8" standard hitch pin (not included)Powder coated black finish

Brophy Hssf Super Heavy-Duty Camper Hold Down, Black Powder Coated Finish, 4/Pk - Hssf - 138-Hssff1

Wider design fits the newest full size pickups No drilling requiredQuick, easy and secure installation, simply tighten two boltsNo projections into wheel wellExtra wide clamp for exceptional holding strengthMade of heavy 3/8" x 3" steelWarning: Will not work on step side beds and some dual wheel models. 4 per box.

Brophy Hscp Super Heavy-Duty Camper Hold Down, Chrome Plated Finish, 4/Pk - Hscp - 138-Hscpf1

Wider design fits the newest full size pickups No drilling requiredQuick, easy and secure installation, simply tighten two boltsNo projections into wheel wellExtra wide clamp for exceptional holding strengthMade of heavy 3/8" x 3" steelWarning: Will not work on step side beds and some dual wheel models. 4 per box.

Bronze Wool Pads, Med. 3/Pack - 35005 - 355-35005F1

Bronze Wool Pads, Medium 3/Pack

Bronze Wool Pads, Fine 3/Pack - 35000 - 355-35000F1

Bronze Wool Pads, Coarse 3/Pack - 35010 - 355-35010F1

Bronze Swivel Eye Bolt Snap - 139016-1 - 354-1390161F1

Swivel eye bolt snaps are designed for use with rope, chain, wire or cable. Constructed of corrosion resistant sand cast brass they can be used for tie-downs, lifting wires or other rigging applications. 360° swivel strap eye eliminates tangling. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever. Polished finish makes them both functional and decorative.

Bronze Square Head Plug, 3/4" - 44654 - 38-44654F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Square Head Plug, 2" - 44658 - 38-44658F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Square Head Plug, 1/2" - 44673 - 38-44673F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Square Head Plug, 1/2" - 44653 - 38-44653F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Square Head Plug, 1" - 44655 - 38-44655F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Square Head Plug, 1-1/4" - 44656 - 38-44656F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Square Head Plug, 1-1/2" - 44657 - 38-44657F1

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Reducing Couplg 3/8X1/8 - 44431 - 38-44431F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Reducing Couplg 3/4X3/8 - 44437 - 38-44437F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Reducing Couplg 2X1-1/4 - 44453 - 38-44453F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Garboard Drain - 520040-1 - 354-5200401F1

Machined bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square top for use with a socket wrench. Installs with three #10 FH fasteners (not included).

Bronze Bushing 2" X 3/4" - 44528 - 38-44528F1

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Bushing 2" X 1" - 44529 - 38-44529F1

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Ball Type Fuel Shut-Off Valve, 3/8" - 78-250-10 - 37-7825010F1

Quality bronze valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding. Features:Surface mounted Fast 90° on-off turn400 psi service ratingRPTFE seats and sealsStainless steel lever and nutAll wetted metallic parts are brass or cast bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Ball Type Fuel Shut-Off Valve, 1/4" - 78-248-10 - 37-7824810F1

Quality bronze valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding. Features:Surface mounted Fast 90° on-off turn400 psi service ratingRPTFE seats and sealsStainless steel lever and nutAll wetted metallic parts are brass or cast bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Bronze Ball Type Fuel Shut-Off Valve, 1/2" - 78-256-10 - 37-7825610F1

Quality bronze valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding. Features:Surface mounted Fast 90° on-off turn400 psi service ratingRPTFE seats and sealsStainless steel lever and nutAll wetted metallic parts are brass or cast bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Brng Protect Cover 232 Pr Replaces P/N 241-81158 Disc - 81158 - 641-81158F1

Bristol Products Xtrm Roofing, 9'6" X 45' - 1700534142711440 - 135-1700534142711445F1

XTRM-PLY is a great way to replace your current RV Roofing. Camper Roofing is flexible and durable, a PVC membrane designed especially for the RV roof. RMA XTRM PVC membrane is a solid material that won't chalk or stain the side of your RV. There's no re-coating as in other types of RV Roofing. It has natural fire retardance and UV resistance. When necessary, you can easily patch and repair your roof with PVC Cement. Save any pieces from your PVC membrane to use for patches in the future. Designed to be installed with RMA adhesive, sealants and butyl tape only.

Bristol Products Xtrm Roofing, 9'6" X 40' - 17005434142711400 - 135-1705434142711440F1

XTRM-PLY is a great way to replace your current RV Roofing. Camper Roofing is flexible and durable, a PVC membrane designed especially for the RV roof. RMA XTRM PVC membrane is a solid material that won't chalk or stain the side of your RV. There's no re-coating as in other types of RV Roofing. It has natural fire retardance and UV resistance. When necessary, you can easily patch and repair your roof with PVC Cement. Save any pieces from your PVC membrane to use for patches in the future. Designed to be installed with RMA adhesive, sealants and butyl tape only.

Bristol Products Xtrm Roofing, 9'6" X 35' - 1700534142711430 - 135-1700534142711435F1

XTRM-PLY is a great way to replace your current RV Roofing. Camper Roofing is flexible and durable, a PVC membrane designed especially for the RV roof. RMA XTRM PVC membrane is a solid material that won't chalk or stain the side of your RV. There's no re-coating as in other types of RV Roofing. It has natural fire retardance and UV resistance. When necessary, you can easily patch and repair your roof with PVC Cement. Save any pieces from your PVC membrane to use for patches in the future. Designed to be installed with RMA adhesive, sealants and butyl tape only.

Bristol Products Xtrm Roofing, 9'6" X 30' - 1700534142711430 - 135-1700534142711430F1

XTRM-PLY is a great way to replace your current RV Roofing. Camper Roofing is flexible and durable, a PVC membrane designed especially for the RV roof. RMA XTRM PVC membrane is a solid material that won't chalk or stain the side of your RV. There's no re-coating as in other types of RV Roofing. It has natural fire retardance and UV resistance. When necessary, you can easily patch and repair your roof with PVC Cement. Save any pieces from your PVC membrane to use for patches in the future. Designed to be installed with RMA adhesive, sealants and butyl tape only.

Bristol Products Xtrm Roofing, 9'6" X 25' - 1700534142711420 - 135-1700534142711425F1

XTRM-PLY is a great way to replace your current RV Roofing. Camper Roofing is flexible and durable, a PVC membrane designed especially for the RV roof. RMA XTRM PVC membrane is a solid material that won't chalk or stain the side of your RV. There's no re-coating as in other types of RV Roofing. It has natural fire retardance and UV resistance. When necessary, you can easily patch and repair your roof with PVC Cement. Save any pieces from your PVC membrane to use for patches in the future. Designed to be installed with RMA adhesive, sealants and butyl tape only.

Bristol Products Xtrm Roofing, 9'6" X 21' - 17005434142711400 - 135-1705434142711421F1

XTRM-PLY is a great way to replace your current RV Roofing. Camper Roofing is flexible and durable, a PVC membrane designed especially for the RV roof. RMA XTRM PVC membrane is a solid material that won't chalk or stain the side of your RV. There's no re-coating as in other types of RV Roofing. It has natural fire retardance and UV resistance. When necessary, you can easily patch and repair your roof with PVC Cement. Save any pieces from your PVC membrane to use for patches in the future. Designed to be installed with RMA adhesive, sealants and butyl tape only.

Bristol Products 27034146B Xtrm Universal Sealant, Self-Leveling, Beige, 10.1 Oz - 27034146B - 135-27034146Bf1

Adheres to all RV roof membranes. XTRM Universal is formuated with a blend of the strongest and most flexible synthetic polymers. Has excellent adhesion to many substrates including aluminum, brass, steel, glass, mortar, wood, PVC, EPDM, TPO and TPV. With superior weather resistance and sealing properties, XTRM Universal remains flexible for years.

Bristol Cable Pull 3" Waste Valve, 96" - 66N4Ab96Gm - 135-66N4Ab96Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol Cable Pull 3" Waste Valve, 72" - 66N4Ab72Gm - 135-66N4Ab72Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol Cable Pull 3" Waste Valve, 60" - 66N4Ab60Gm - 135-66N4Ab60Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol Cable Pull 3" Waste Valve, 48" - 66N4Ab48Gm - 135-66N4Ab48Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol Cable Pull 1-1/2" Waste Valve, 96" - 66N11Ab96Gm - 135-66N11Ab96Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol Cable Pull 1-1/2" Waste Valve, 72" - 66N11Ab72Gm - 135-66N11Ab72Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol Cable Pull 1-1/2" Waste Valve, 48" - 66N11Ab48Gm - 135-66N11Ab48Gmf1

Bristol termination valve with cable pull handle. Made in USA with easy to pull technology.

Bristol 64Wa35 Qestpex 1/2" Hole Pex Cone Washer - 64Wa35 - 135-64Wa35F1

For PEX Tubing

Bristol 49Utt333 Qestpex Tee, 1/2" Barb - 49Utt333 - 135-49Utt333F1

For PEX Tubing

Bristol 49Utme33 Qestpex Male Elbow - 1/2" Barb X 1/2" Mpt - 49Utme33 - 135-49Utme33F1

For PEX Tubing

Bristol 49Utmc33 Qestpex Male Adapter, 1/2" Barb X 1/2" Mpt - 49Utmc33 - 135-49Utmc33F1