Select Category
_0x200.jpg)
Rule 3700 Gph High Capacity Bilge Pump, 24V - 16A - 29-16Af1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.
Rule 3700 Gph High Capacity Bilge Pump, 12V - 14A - 29-14Af1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.
Rule 3700 GPH General Purpose End Suction Centrifugal Pump - 24V
Rule 3" Inline Bilge Blower 12V - 140 - 29-140F1
Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection.
Rule 3-Way Bilge Panel Lighted Switch - 42 - 29-42F1
Control any pump equipped with automatic switch. Three positions: automatic, off and manual. Has spring return "off" from manual position. Black stainless steel panel with red indicator light and fuse holder.
Rule 3-Way Bilge Panel Lighted Switch - 41 - 29-41F1
Control any pump equipped with automatic switch. Three positions: automatic, off and manual. Has spring return "off" from manual position. Black stainless steel panel with red indicator light and fuse holder.
Rule 3-Way Bilge Panel Lighted Rocker Switch Panel 12V - 43 - 29-43F1
Has a built-in fuse holder and an internally lighted rocker switch with 3 positions with the "fail-safe" spring return "off" from the "manual" position. Features a black plastic panel.
Rule 3 Way Bilge Panel Switch 12/24/32V - 45 - 29-45F1
Has three positions: automatic, off and manual. Manual position has famous "fail-safe" spring return "off" so pump can't be left on by accident. Black stainless steel panel.
Rule 27Sa 12V 1,100 Gph 3.3 Amp Automatic Bilge Pump - 27Sa - 29-27Saf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 27Da 1,100 Gph 12V 3.7 Amp Submersible Bilge Pump - 27Da - 29-27Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 25Sa6Wc 12V Pwc Automatic Bilge Pump, 500 Gph - 25Sa-6Wc - 29-25Sa6Wcf1
This compact pump fits in tight spaces to remove water from the engine compartment. Easy installation. Equipped with a gasoline resistant strainer base and 6' wire lead. Cycles every 2-1/2 minutes to check for waterNo float switch neededCheck valve w/air vent to prevent airlockGasoline-resistant strainer baseIgnition protected
Rule 25Sa 12V 500 Gph 1.9 Amp Automatic Bilge Pump - 25Sa - 29-25Saf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 25Da35A Pump & Switch Combo, 500 Gph - 25Da-35A - 29-25Da35Af1
Combo includes Rule bilge pump and Rule-A-Matic float switch. Completely SubmersibleIgnition ProtectedMercury-Free SwitchStainless Steel ShaftHigh Abrasion, Tin Coated Silicone Blocked WireIncludes Black Flow Preventer
Rule 25Da24 500 Gph 24V 0.8 Amp Submersible Bilge Pump - 25Da-24 - 29-25Da24F1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 25Da 500 Gph 12V 1.6 Amp Submersible Bilge Pump - 25Da - 29-25Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 24Da35A Pump & Switch Combo, 360 Gph - 24Da-35A - 29-24Da35Af1
Combo includes Rule bilge pump and Rule-A-Matic float switch. Completely SubmersibleIgnition ProtectedMercury-Free SwitchStainless Steel ShaftHigh Abrasion, Tin Coated Silicone Blocked WireIncludes Black Flow Preventer
Rule 213 "Y" Fitting For 1-1/8" Hose - 213 - 29-213F1
Y Fitting for use with bilge pump hose.
Rule 20Sa 12V 800 Gph 2.8 Amp Automatic Bilge Pump - 20Sa - 29-20Saf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 20Da-24 800 Gph 24V 1.7 Amp Submersible Bilge Pump - 20Da-24 - 29-20Da24F1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 20Da 800 Gph 12V 3.4 Amp Submersible Bilge Pump - 20Da - 29-20Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 2000Gph High Capacity Bilge Pump Ul Listed With 6' Leads, 12V - 10-6Ul - 29-106Ulf1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. 106UL pump is UL Listed and includes 6' leads.
Rule 2-Way Bilge Panel Switch 12/24/32V - 49 - 29-49F1
For any manually operated system. Attractive Black stainless steel panel. Fingertip control.
Rule 18A 24V General Purpose Centrifugal Pump 3700 Gph - 18A - 29-18Af1
Designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy-duty submersible construction for use on commercial or pleasure boats. Must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers a lot of water at low pressure.
Rule 17A 12V General Purpose Centrifugal Pump 3800 Gph - 17A - 29-17Af1
Designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy-duty submersible construction for use on commercial or pleasure boats. Must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers a lot of water at low pressure.
Rule 14A-6Ul 3,700 Gph 12V 15.5 Amp High Capacity Bilge Pump With 6' Leads - 14A-6Ul - 29-14A6Ulf1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. 14A6UL pump is UL Listed and includes 6' leads.
Rule 12V Tournament Series Livewell/Aerator Pump 1600 Gph - 209Fdp - 29-209Fdpf1
High capacity anti-airlocking pumps, designed to withstand the rigors of tournament fishing while suppling the volume of water required to keep bait and catch alive and healthy. Silent running and vibrationless, will not scare the fish away. Anti-airlock feature and a heavy duty long life motor.209FDP: Nylon, dual port base for optional washdown pump connection. 1" NPT female intake, 1-1/8" discharge and a 1/2" NPT threaded port for washdown installation.209B: Bronze Base, 1" NPT female intake and 1-1/8" discharge.
Rule 12V Tournament Series Livewell/Aerator Pump 1600 Gph - 209B - 29-209Bf1
High capacity anti-airlocking pumps, designed to withstand the rigors of tournament fishing while suppling the volume of water required to keep bait and catch alive and healthy. Silent running and vibrationless, will not scare the fish away. Anti-airlock feature and a heavy duty long life motor.209FDP: Nylon, dual port base for optional washdown pump connection. 1" NPT female intake, 1-1/8" discharge and a 1/2" NPT threaded port for washdown installation.209B: Bronze Base, 1" NPT female intake and 1-1/8" discharge.
Rule 12V Eco Switch - 39 - 29-39F1
An ecologically sound automatic bilge pump control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there are no submerged electrical connections at all.
Rule 12V Automatic Bilge Pump, 2000 Gph - 53S - 29-53Sf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 12V Automatic Bilge Pump, 1500 Gph - 51S - 29-51Sf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 1223R Check Valve, 1-1/8" - 1223R - 29-1223Rf1
Pump check valve.
Rule 1222R Check Valve, 1" - 1222R - 29-1222Rf1
Pump check valve.
Rule 1221R Check Valve, 3/4" - 1221R - 29-1221Rf1
Pump check valve.
Rule 1220R Check Valve, 3/4" - 1220R - 29-1220Rf1
Pump check valve.
Rule 1208R Barbed Bilge Pump Port Fitting, 1-1/8" Straight - 1208R - 29-1208Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1207R Barbed Bilge Pump Port Fitting, 1-1/8" 90° - 1207R - 29-1207Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1206R Barbed Bilge Pump Port Fitting, 1" Straight - 1206R - 29-1206Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1205R Barbed Bilge Pump Port Fitting, 1" 90° - 1205R - 29-1205Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1204R Barbed Bilge Pump Port Fitting, 3/4" Straight - 1204R - 29-1204Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1203R Barbed Bilge Pump Port Fitting, 3/4" 90° - 1203R - 29-1203Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1202R Barbed Bilge Pump Port Fitting, 1" Straight - 1202R - 29-1202Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1201R Barbed Bilge Pump Port Fitting, 3/4" 90° - 1201R - 29-1201Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1200R Barbed Bilge Pump Port Fitting, 3/4" Straight - 1200R - 29-1200Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 110Vac Pump, 1800 Gph - A53D - 29-A53Df1
Ideal for dockside, utility or sump pump use. 110 Volt AC pump features heavy duty construction for a wide range of uses and applications. 90° Elbow adapter for connecting discharge nozzle to standard pipe thread and an 8' power cord.
Rule 110V Ac Automatic Sump Pump With 8' Cord 1800 Gph - A53S - 29-A53Sf1
Designed for 110 volt AC application and installation possibilities. Comes with 8' cord and elbow adapter. Includes garden hose adapter and 90° elbow adapter for 1" NPT pipe.
Rudder Zinc 5" Dia. - Bsm5Rb - 377-Bsm5Rbf1
Rudder Button Anodes - Zinc
Rudder Zinc 4" Dia. - Bsm4Rb - 377-Bsm4Rbf1
Rudder Button Anodes - Zinc
Rudder Zinc 3" Dia. - Bsm3Rb - 377-Bsm3Rbf1
Rudder Button Anodes - Zinc
Rudder Zinc 2" Dia. - Bsm2Rb - 377-Bsm2Rbf1
Rudder Button Anodes - Zinc
Rudder Bearing Flange - 000Rbf125 - 379-000Rbf125F1
Cast bronze.
Rubex Prop Display Rack Bell Ma Fly - 9990245 - 496-9990245F1
Rubbing Compound, Qt. - 5954 - 71-05954F1
Recommended for heavy aggressive compounding of paint. Clings to paint surface. Remains wet on the job with little or no mess. Maintains high rate of cut with constant pressure. Buffs to high gloss with minimum swirl marks. For hand or machine.
Rubber Tie Down, 35" - 635031 - 354-635031F1
These Rubber Tie Downs are great for securing tarps, as well as cargo on trailers, trucks, campers, etc. Excellent for cooler climates; natural rubber straps will not become brittle, snap or tear in freezing temperatures. Constructed of rugged, long-life, natural black rubber with two zinc plated steel hooks.
Rubber Tie Down, 25" - 635021 - 354-635021F1
These Rubber Tie Downs are great for securing tarps, as well as cargo on trailers, trucks, campers, etc. Excellent for cooler climates; natural rubber straps will not become brittle, snap or tear in freezing temperatures. Constructed of rugged, long-life, natural black rubber with two zinc plated steel hooks.
Rubber Tie Down, 18-1/2" - 635015 - 354-635015F1
These Rubber Tie Downs are great for securing tarps, as well as cargo on trailers, trucks, campers, etc. Excellent for cooler climates; natural rubber straps will not become brittle, snap or tear in freezing temperatures. Constructed of rugged, long-life, natural black rubber with two zinc plated steel hooks.
