Select Category
_0x200.jpg)
T-H Marine Screw Down Deck Plate 8" Od, Black - Sdp2Dp - 232-Sdp2Dpf1
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material.
T-H Marine Screw Down Deck Plate 5-5/8" Od, Black - Sdp1Dp - 232-Sdp1Dpf1
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material.
T-H Marine Screw Down Deck Plate 10" Od, Fish White - Sdp3Fwdp - 232-Sdp3Fwdpf1
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material.
T-H Marine Saf-T-Stop™ Ignition Kill Switch For Single Outboard - Ks1Dp - 232-Ks1Dpf1
Meets all requirements for emergency stop switches Strong coiled lanyardIsolated circuits on dual units to prevent feedbackMounts anywhere - requires 1-1/2" hole
T-H Marine Rod Tamer Rod Straps, 12" Gunwale Mount, Holds Up To 3 Rods - Rhd1Dp - 232-Rhd1Dpf1
Strap is molded of black poly material that mounts on the gunnel and stretches to hook to a loop mounted on the deck. Installs very easily in a 3/4" diameter hole with the black stainless steel screws that are included. Strap retracts into the gunnel when not in use.
T-H Marine Rod Tamer Rod Straps - Rt18Dp - 232-Rt18Dpf1
Deck MountMolded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Will not get hung up on fish hooks, lose their hold when wet, or fade. The strap stretches over rods and hooks into a loop mounted on the deck. (Mounts with one countersunk screw).
T-H Marine Rod Tamer Rod Straps - Rt14Dp - 232-Rt14Dpf1
Deck MountMolded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Will not get hung up on fish hooks, lose their hold when wet, or fade. The strap stretches over rods and hooks into a loop mounted on the deck. (Mounts with one countersunk screw).
T-H Marine Rmc102Mgdp Troll-Tamer Trolling Motor Stabilizer Lock For Motorguide Tour Series - Rmc-102Mg-Dp - 232-Rmc102Mgdpf1
Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, it has been designed and tested in the nastiest conditions by top touring pros. Prevents Damage to Trolling MotorsLocks Motor to Deck SecurelyLocking Pin with Quick Release Toe Kick BaseAll Stainless Steel © No Rust or Corrosion
T-H Marine Rigging Hose 2" X 50' - Rfh3Dp - 232-Rfh3Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Hose 2" X 50' - Rfh2Dp - 232-Rfh2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Hose 2" X 50' - Rfh1Dp - 232-Rfh1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange Hose Union For 2" Hose, Black - Rfhu1Dp - 232-Rfhu1Dpf1
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose.
T-H Marine Rigging Flange Hose Union For 2" Hose With 3/4" Fuel Hose Port, Black - Rffhp1Dp - 232-Rffhp1Dpf1
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose.
T-H Marine Rigging Flange For 2" Id Hose - Rf2Dp - 232-Rf2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf1Dp - 232-Rf1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf1Cpdp - 232-Rf1Cpdpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2-1/2" Id Hose, Black - Rf-2.5-1-Dp - 232-Rf251Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk2Dp White Rigging Flange Hose And 4' Of 2" White Hose - Rfk-2-Dp - 232-Rfk2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk25Y3Dp Grey Rigging Flange Hose And 4' Of 2.5" Grey Hose - Rfk25Y3Dp - 232-Rfk25Y3Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk25Y2Dp White Rigging Flange Hose And 4' Of 2.5" White Hose - Rfk25Y2Dp - 232-Rfk25Y2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk25Y1Dp Black Rigging Flange Hose And 4' Of 2.5" Black Hose - Rfk25Y1Dp - 232-Rfk25Y1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk1Cpdp Chrome Rigging Flange Hose And 4' Of 2" Black Hose - Rfk1Cpdp - 232-Rfk1Cpdpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Replacement Spring For All Models Of Hot Foot - Hfs1Dp - 232-Hfs1Dpf1
Replacement spring.
T-H Marine Replacement Skeg For Mercury V6 Outboards And Mercruiser Stern Drives (I/Os) - Rs4Dp - 232-Rs4Dpf1
Solid cast aluminum. Welds to lower unit. Easily cut to shape.
T-H Marine Replacement Skeg For Bombardier, Evinrude, Johnson, Omc, Yamaha V6 Outboards - Rs1Dp - 232-Rs1Dpf1
Solid cast aluminum. Welds to lower unit. Easily cut to shape.
T-H Marine Replacement Skeg For Bombardier, Evinrude, Johnson, Omc, Yamaha V4 Outboards (85 To 140 Hp) - Rs2Dp - 232-Rs2Dpf1
Solid cast aluminum. Welds to lower unit. Easily cut to shape.
T-H Marine Replacement Skeg For Bombardier, Evinrude, Johnson, Omc, Yamaha V4 Outboards (40-80 Hp) - Rs3Dp - 232-Rs3Dpf1
Solid cast aluminum. Welds to lower unit. Easily cut to shape.
T-H Marine Replacement Relay Harness f/Hydraulic Jack Plates 2014+
T-H Marine Replacement Actuator f/ATLAS™ Jack Plates Post March 2014
T-H Marine Reducing Tee For Hose 1-1/2 X 3/4 X 1-1/2" , Black - Tee150Dp - 232-Tee150Dpf1
T-H Marine Quick Release Deck Plate 8" Diameter, Polar White - Dpcam82Dp - 232-Dpcam82Dpf1
Cam hatch holds secure Hidden fasteners in ringEasy to open and closeTextured finish
T-H Marine Quick Release Deck Plate 6" Diameter, Polar White - Dpcam62Dp - 232-Dpcam62Dpf1
Cam hatch holds secure Hidden fasteners in ringEasy to open and closeTextured finish
T-H Marine Quick Flush™ Outboard Flush Fitting Kit f/Mercury & Yamaha Outboards
T-H Marine Quick Flush Kit f/OMC Outboards
T-H Marine Push-In Plug For 1-1/2" Thru-Hull Drains - Pp150 - 232-Pp150F1
These push in plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. These plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
T-H Marine Push In Overflow Drain Tube Straight Fits All T-H 1-1/8" Thru Hulls, 12" L - Odt1Dp - 232-Odt1Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push In Overflow Drain Tube Straight Fits All T-H 1-1/2" Thru Hulls, 18" L With Screen - Odt2Dp - 232-Odt2Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push In Overflow Drain Tube 90 Degree Fits All 1-1/8" T-H Thru Hulls, 12" L - Odt190Dp - 232-Odt190Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push In Overflow Drain Tube 90 Degree First All T-H 1-1/2" Thru Hulls, 18" L With Screen - Odt290Dp - 232-Odt290Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Prop Master Propeller Wrench With 9/16" Garboard Drain Socket On Back Fits All 1-1/16" Prop Nuts - Pmw1Dp - 232-Pmw1Dpf1
A 1-1/16" six point socket style wrench made of high tensile strength, indestructible nylon. Resists fuel, sun, salt water, and other chemicals, will not rattle or strip nuts. Will not slip. Reverse side features 9/16" garboard drain plug socket for square heads. Easier to use than channel lock pliers. High visibility color.
T-H Marine Pro Hi-Jacker Jack Plate With 6" Setback For Outboards Up To 175 Hp - Jp6Pwdp - 232-Jp6Pwdpf1
Constructed of 3/8" high-strength aluminum with a one-piece design with locking bars and a top adjust screw for one wrench adjustment. Maximum 175 hp. 6" setback, 4" vertical adjustment.
T-H Marine Pontoon Gate Latch Fits 1", 1-1/8" And 1-1/4" Square Tubing - Gl2Dp - 232-Gl2Dpf1
Entire unit installs on gate only Operates on right or left hinged gatesFits 1", 1-1/8" or 1-1/4" square tubePrevents gate from swinging inwardMolded nylon for strengthPrevents rattling
T-H Marine Pontoon Gate Latch Fits 1", 1-1/8" And 1-1/4" Square Tubing - Gl1Dp - 232-Gl1Dpf1
Entire unit installs on gate only Operates on right or left hinged gatesFits 1", 1-1/8" or 1-1/4" square tubePrevents gate from swinging inwardMolded nylon for strengthPrevents rattling
T-H Marine Pontoon Door Stops With Ribs Fits Up To 1-1/4" Tubing - Ds1Rdp - 232-Ds1Rdpf1
For Pontoon Boats.Injection molded, designed to fit 1-1/4" square tubing. Anti-rattle. Requires no welding. Simple installation with one #10 screw.
T-H Marine Pontoon Door Stops With Ribs Fits Up To 1-1/4" Tubing - Ds1Ldp - 232-Ds1Ldpf1
For Pontoon Boats.Injection molded, designed to fit 1-1/4" square tubing. Anti-rattle. Requires no welding. Simple installation with one #10 screw.
T-H Marine Pfac-1 Pontoon Fender Hanger Clips, 1 Pr. - Pfac-1-Dp - 232-Pfac1Dpf1
Easily Snaps onto Pontoon Rails Convenient Way to Attach Docking FendersStylish Gray Composite Material
T-H Marine Pedestal Base Plug Fits 1.77" Bases - Pbp1Dp - 232-Pbp1Dpf1
Seals Pedestal Base When Not in Use Fits All 1.77" BasesSlide Pin for Easy RemovalMolded - Won't Rust or Corrode
T-H Marine Oetiker Stainless Steel Stepless Ear Clamp Kit With Crimping Tool (Contains 10 Each Of The 15 Most Needed Sizes) - 18500000 - 232-18500000F1
Oetiker one ear hose clamps with mechanical interlock. Specially formed strip edges reduce the risk of damage to the part being clamped. Mechanical interlock allows use of pre-coated materials. Available in key sizes. Uniform compression and increased clamping force. Features: All 304 stainless steel, Narrow band - 7mm, Lightweight designTampering is visibleFull size range for all marine hose Kit Includes:16700001 5.8 - 7.0mm 16700004 7.8 - 9.5mm16700006 8.8 - 10.5mm (3/8) 16700007 9.6 - 11.3mm16700010 10.8 - 13.3mm16700011 11.0 - 13.8mm (1/2)16700012 11.5 - 14.0mm 16700013 12.0 - 14.5mm16700016 13.2 - 15.7mm16700017 14.5 - 17.0mm (5/8)16700020 15.3 - 18.5mm 16700024 17.8 - 21.0mm (3/4)16700031 22.4 - 25.6mm (1)16700037 26.9 - 30.1mm (1-1/8")16700040 28.4 - 31.6mm16705000 34.9 - 38.1mm (1-1/2) 16705989 37.8 - 41.0mm14100396 Standard Jaw Pincers (formerly 14100118)
T-H Marine Nautical Slam Latch For 2" Hole - Nfsl52Dp - 232-Nfsl52Dpf1
Low profile oval design. UV stable, stainless steel striker plate, fits a 2" hole. Comes with shims/spacers for 1/16" to 7/8" thickness
T-H Marine Nautical Slam Latch For 2" Hole - Nfsl51Dp - 232-Nfsl51Dpf1
Low profile oval design. UV stable, stainless steel striker plate, fits a 2" hole. Comes with shims/spacers for 1/16" to 7/8" thickness
T-H Marine Mr. Crappie Bait Blaster - Underwater Green Light
T-H Marine Mini-Jacker Jack Plate For Outboards Up To 35Hp (Max Wt 150 Lbs.) - Mj1Dp - 232-Mj1Dpf1
Designed for clamp-on mount outboard motors up to 35 hp. Improves performance and handling of smaller or lighter boats. Also allows mounting of long shaft motors to shorter shaft transom boats. Engine mounting surface is 11-1/2" x 10".
T-H Marine Mini Livewell/Courtesy Light Led-Potted, White - Lwlm1Pleddp - 232-Lwlm1Pleddpf1
T-H Marine Mini Livewell/Courtesy Light LED-Potted, White Totally waterproof, can be mounted underwaterNeoprene sealing gasket includedBright 3-element LED bulbFits 5/8" Hole
T-H Marine Micro Jacker Clamp-On Motor Adapter - Ahjm-Cma-Dp - 232-Ahjmcmaf1
O/B Clamp On Adaptor
T-H Marine Max-Air Venturi With Face Plate And 6' Tubing - Mav2Ktdp - 232-Mav2Ktdpf1
With face plate and 6' tubingDraws fresh air from outside the livewell and injects tiny air bubbles into the water flowing into the livewell. Aerated water enters the well at a lower level than with traditional spray heads. The reduced restriction of this fitting allows more water to flow from the pump, works well on fresh water intake or recirculation systems. Faceplate can be mounted anywhere above the water line.
T-H Marine Low Profile Twist-Out Deck Plate 6" - Dpslp62Dp - 232-Dpslp62Dpf1
Unique and innovative design features a fully overlapping lid and a positive "O" ring seal insuring a watertight fit. Hidden fasteners provide smooth look.
T-H Marine Low Profile Twist-Out Deck Plate 6" - Dpslp61Dp - 232-Dpslp61Dpf1
Unique and innovative design features a fully overlapping lid and a positive "O" ring seal insuring a watertight fit. Hidden fasteners provide smooth look.
T-H Marine Low Profile Twist-Out Deck Plate 4" - Dpslp42Dp - 232-Dpslp42Dpf1
Unique and innovative design features a fully overlapping lid and a positive "O" ring seal insuring a watertight fit. Hidden fasteners provide smooth look.
T-H Marine Low Profile Twist-Out Deck Plate 4" - Dpslp41Dp - 232-Dpslp41Dpf1
Unique and innovative design features a fully overlapping lid and a positive "O" ring seal insuring a watertight fit. Hidden fasteners provide smooth look.
T-H Marine Low Profile Bullet Navigation Lights - Led-Lpnav-2-Dp - 232-Ledlpnav2Dpf1
Lowest Footprint of Any Single Color LED Navigation Bow Light 316 Stainless Housing2 Nautical Mile USCG CertificationPort/Starboard Pair
T-H Marine Low Profile Bullet Navigation Lights - Led-Lpnav-1-Dp - 232-Ledlpnav1Dpf1
Lowest Footprint of Any Single Color LED Navigation Bow Light 316 Stainless Housing2 Nautical Mile USCG CertificationPort/Starboard Pair
T-H Marine Louvered Vent Cover 5-5/8" Od, Fits Into 4" Hole - Lv1Fwdp - 232-Lv1Fwdpf1
Designed with louvers to eliminate see-thru look and deflect rain. Designed with a flange molded into part so raw edges of cut are hidden and protected.
T-H Marine Louvered Vent Cover 5-5/8" Od, Fits Into 4" Hole - Lv1Dp - 232-Lv1Dpf1
Designed with louvers to eliminate see-thru look and deflect rain. Designed with a flange molded into part so raw edges of cut are hidden and protected.
T-H Marine Lid & Hatch Support Spring With Molded Nylon Ends 7/16" X 8-1/2" L - Ls-2 - 232-Ls2Dpf1
The stainless steel spring then supports the lid, hatch or cover in the open position. Stainless steel spring with nylon ends for mounting with four countersunk screws (not included).
T-H Marine Ledghbssbdp Molded Grab Handle With Stainless Accent Rings & Blue Led Light, Black - Led-Ghbss-B-Dp - 232-Ledghbssbdpf1
Attractive blue LED lighting Fits standard TH Grab Handle footprintMolded, UV-resistant grab handles 7-1/2" L x 2-1/2" HSoft overmold on firm handleTextured for sure gripRubberized ergonomic feelHidden fastenersCenter of screw to center of screw measures 7-1/4"
T-H Marine Led39893Dp Led Super Spreader Light 6 Leds, White - Led-39893-Dp - 232-Led39893Dpf1
Flood your boat deck with bright and smooth illumination to make low light or night fishing safer and easier. Great for new installations or replacing 55W halogen flood lights. Power consumption 80% lower than incandescent lights. Super bright, efficient, long lasting life (up to 30,000 hours). Optical grade PMMA lens. Die cast aluminum housing, powder coated white. Color temperature: 6000K, Light output: 1150 Lumens. Simple, single bolt installation. 316 stainless steel mounting bracket and hardware included.
T-H Marine Led39120Dp Oval Recessed Mount Spreader 4 Bright White Led Lights - Led-39120-Dp - 232-Led39120Dpf1
Super Bright White 4 Element LEDs Powder Coated Aluminum CaseRecessed Mounting - Fits T-Top Molded EnclosuresFlood Light Spread Illuminates Decks Fully5-7/8" x 1-3/4" x 1-5/8"D
T-H Marine Led Surface Mount Dome Light With Switch 4" - Led51830Dp - 232-Led51830Dpf1
Ideal for interior use in boats, RVs and other applications. Clear polycarbonate lens pattern is uniquely designed to distribute the illumination to a wide beam angle of no less than 120°. Super flux (P4) type LEDs, super bright, long life span up to 100,000 hours. UV stable white housing resists color fading. On/Off rocker switch on bezel. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Hidden fasteners.
T-H Marine Led Surface Mount Dome Light With Switch 4" - Led51829Dp - 232-Led51829Dpf1
Ideal for interior use in boats, RVs and other applications. Clear polycarbonate lens pattern is uniquely designed to distribute the illumination to a wide beam angle of no less than 120°. Super flux (P4) type LEDs, super bright, long life span up to 100,000 hours. UV stable white housing resists color fading. On/Off rocker switch on bezel. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Hidden fasteners.
T-H Marine Led Stainless Puck Light - Led51897Dp - 232-Led51897Dpf1
Highly polished 304 stainless steel housing. Ideal for use in boats and RV's as a ceiling light, courtesy light, task light, under cabinets, cockpits, headliners, and compartments. Clear Polycarbonate engineered lens optics provide uniform and wide angle illumination. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. LEDs feature super long life span of up to 50,000 hours.
T-H Marine Led Stainless Puck Light - Led51832Dp - 232-Led51832Dpf1
Highly polished 304 stainless steel housing. Ideal for use in boats and RV's as a ceiling light, courtesy light, task light, under cabinets, cockpits, headliners, and compartments. Clear Polycarbonate engineered lens optics provide uniform and wide angle illumination. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. LEDs feature super long life span of up to 50,000 hours.
T-H Marine Led Stainless Puck Light - Led51831Dp - 232-Led51831Dpf1
Highly polished 304 stainless steel housing. Ideal for use in boats and RV's as a ceiling light, courtesy light, task light, under cabinets, cockpits, headliners, and compartments. Clear Polycarbonate engineered lens optics provide uniform and wide angle illumination. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. LEDs feature super long life span of up to 50,000 hours.
T-H Marine Led Stainless Puck Light - Led51828Dp - 232-Led51828Dpf1
Highly polished 304 stainless steel housing. Ideal for use in boats and RV's as a ceiling light, courtesy light, task light, under cabinets, cockpits, headliners, and compartments. Clear Polycarbonate engineered lens optics provide uniform and wide angle illumination. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. LEDs feature super long life span of up to 50,000 hours.
T-H Marine Led Stainless Puck Light - Led51827Dp - 232-Led51827Dpf1
Highly polished 304 stainless steel housing. Ideal for use in boats and RV's as a ceiling light, courtesy light, task light, under cabinets, cockpits, headliners, and compartments. Clear Polycarbonate engineered lens optics provide uniform and wide angle illumination. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. LEDs feature super long life span of up to 50,000 hours.
T-H Marine Led Slim Line Utility Strip Lights - Led51811Dp - 232-Led51811Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Slim Line Utility Strip Lights - Led51810Dp - 232-Led51810Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Slim Line Utility Strip Lights - Led51806Dp - 232-Led51806Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Slim Line Utility Strip Lights - Led51805Dp - 232-Led51805Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Slim Line Utility Strip Lights - Led51803Dp - 232-Led51803Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Slim Line Utility Strip Lights - Led51801Dp - 232-Led51801Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Slim Line Utility Strip Lights - Led51800Dp - 232-Led51800Dpf1
These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.
T-H Marine Led Rotating Rail Light With Switch, Cool White Leds - Led51858Dp - 232-Led51858Dpf1
This series of the lights features a rotating axis design to adjust the light to any desired direction. Circuit board coated with conformal coating to resist moisture, corrosion and vibration. Powder coated aluminum extrusion rail with molded mounting ends. Super bright, efficient, long lasting LEDs (up to 100,000 hours).
T-H Marine Led Rotating Rail Light With Switch, Cool White Leds - Led51857Dp - 232-Led51857Dpf1
This series of the lights features a rotating axis design to adjust the light to any desired direction. Circuit board coated with conformal coating to resist moisture, corrosion and vibration. Powder coated aluminum extrusion rail with molded mounting ends. Super bright, efficient, long lasting LEDs (up to 100,000 hours).
T-H Marine Led Recessed Puck Light 3" - Led51849Dp - 232-Led51849Dpf1
This recessed mount LED light is great for cabin and compartment lighting in boats and RV's. Clear polycarbonate lens with engineered optics provides uniform and comfortable illumination. Low profile great for under cabinets, rod lockers, utility bins, etc. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Black, white & chrome bezels included. Requires 2" hole diameter.
T-H Marine Led Recessed Puck Light 3" - Led51848Dp - 232-Led51848Dpf1
This recessed mount LED light is great for cabin and compartment lighting in boats and RV's. Clear polycarbonate lens with engineered optics provides uniform and comfortable illumination. Low profile great for under cabinets, rod lockers, utility bins, etc. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Black, white & chrome bezels included. Requires 2" hole diameter.
T-H Marine Led Recessed Puck Light 3" - Led51847Dp - 232-Led51847Dpf1
This recessed mount LED light is great for cabin and compartment lighting in boats and RV's. Clear polycarbonate lens with engineered optics provides uniform and comfortable illumination. Low profile great for under cabinets, rod lockers, utility bins, etc. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Black, white & chrome bezels included. Requires 2" hole diameter.
T-H Marine Led Oblong Courtesy Light With Stainless Steel Bezel - Led51825Dp - 232-Led51825Dpf1
Attractive, polished SS bezel lights can be used virtually anywhere with applications such as an accent, step, task, compartment or courtesy lighting. Surface mount design features hidden fasteners. The engineered lens directs light down to avoid light from shining into the eyes. Epoxy sealed circuit board resists water, corrosion and vibration. LED's have a super long life up to 100,000 hours.
T-H Marine Led Oblong Courtesy Light With Stainless Steel Bezel - Led51824Dp - 232-Led51824Dpf1
Attractive, polished SS bezel lights can be used virtually anywhere with applications such as an accent, step, task, compartment or courtesy lighting. Surface mount design features hidden fasteners. The engineered lens directs light down to avoid light from shining into the eyes. Epoxy sealed circuit board resists water, corrosion and vibration. LED's have a super long life up to 100,000 hours.
T-H Marine Led Oblong Courtesy Light With Stainless Steel Bezel - Led51823Dp - 232-Led51823Dpf1
Attractive, polished SS bezel lights can be used virtually anywhere with applications such as an accent, step, task, compartment or courtesy lighting. Surface mount design features hidden fasteners. The engineered lens directs light down to avoid light from shining into the eyes. Epoxy sealed circuit board resists water, corrosion and vibration. LED's have a super long life up to 100,000 hours.
T-H Marine Led Mini Dual Mount Courtesy Light, White - Led51880Dp - 232-Led51880Dpf1
These mini utility lights use three LEDs to accent the cabin with soft light. They mount vertically or horizontally for low-profile placement on steps, companionways, under cabinets, compartments and more. Low heat, low amp draw, noncorrosive, shock-resistant and water-resistant. Stainless steel fasteners included.
T-H Marine Led Flex Strip Lights - Led51965Dp - 232-Led51965Dpf1
Use LED Flexstrip rope light under cabinets, shelving, interiors, bars, edge lit panels or any other application you can think of. The lights are super bright and consume very little power. TH Marine rope lights are enscased in a waterproof sheath, can be cut to length and are water and moisture resistant. Includes hi-strength 3M backing tape for easy mounting.
T-H Marine Led Flex Strip Lights - Led51957Dp - 232-Led51957Dpf1
Use LED Flexstrip rope light under cabinets, shelving, interiors, bars, edge lit panels or any other application you can think of. The lights are super bright and consume very little power. TH Marine rope lights are enscased in a waterproof sheath, can be cut to length and are water and moisture resistant. Includes hi-strength 3M backing tape for easy mounting.
T-H Marine Led Flex Strip Lights - Led51956Dp - 232-Led51956Dpf1
Use LED Flexstrip rope light under cabinets, shelving, interiors, bars, edge lit panels or any other application you can think of. The lights are super bright and consume very little power. TH Marine rope lights are enscased in a waterproof sheath, can be cut to length and are water and moisture resistant. Includes hi-strength 3M backing tape for easy mounting.
