Select Category
Brands
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81203 - 241-81203F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81204 - 241-81204F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks On Both Ends - 81205 - 241-81205F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Speed Release For Dock Ladder - 27271 - 241-27271F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water. 250 lb. capacity.
Tie Down Engineering Super Hooker Anchor - 95030 - 241-95030F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #2-1/2 with 130 Ibs. holding stregth.
Tie Down Engineering Super Hooker Anchor - 95035 - 241-95035F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #4 with 250 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95040 - 241-95040F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #8 with 480 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95045 - 241-95045F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #13 with 740 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95050 - 241-95050F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #18 with 1050 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95055 - 241-95055F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #22 with 1300 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95095 - 241-95095F1
The Super Hooker anchor is a good choice for your anchoring needs. This lightweight, hot dipped galvanized Super Hooker anchor has strong, wide flukes that penetrate quickly and firmly for maximum holding power. The fully welded crown configuration provides the right angles for ultimate holding power and secure penetration. The Super Hooker stows flat and can be used with most fluke type anchor storage systems. Includes Super Hooker anchor, rope, galvanized steel chain and shackles. 8 lb. Super Hooker for 17'-24' boats.
Tie Down Engineering Super Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95100 - 241-95100F1
The Super Hooker anchor is a good choice for your anchoring needs. This lightweight, hot dipped galvanized Super Hooker anchor has strong, wide flukes that penetrate quickly and firmly for maximum holding power. The fully welded crown configuration provides the right angles for ultimate holding power and secure penetration. The Super Hooker stows flat and can be used with most fluke type anchor storage systems. Includes Super Hooker anchor, rope, galvanized steel chain and shackles. 13 lb. Super Hooker for 25'-30' boats.
Tie Down Engineering Tire Carrier - 86060 - 241-86060F1
Designed for use with large tube, I-beam and aluminum trailers. Heavy duty steel carrier mounts larger spare tires. Fits frames from 5" to 8" in height. Bolts can be positioned to accommodate 4, 5, 6 and 8 lug wheels.
Tie Down Engineering Tire Carrier - 86069 - 241-86069F1
Adjustable bolt circle fits both 4 lug and 5 lug wheels. Fits all trailer frames up to 6" high. Heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86079 - 241-86079F1
Made from heavy-duty steel. Carrier mounts both spare hub & spare tire designed for UHI 1750# hub with 1-1/16" and 1-3/8" bearings. Fits all trailer frames up to 3" wide and 4" high. Security holes for optional cable & lock. Includes 5 stud pre-greased hub with bearings.
Tie Down Engineering Tire Carrier - 86091 - 241-86091F1
7/16" U-bolt design, accommodating 4 and 5 lug wheels. Fits 8" to 14" tires and most 15". Overall length 8-3/4" with a 3"thread length. Zinc plated. Fits all trailer frames up to 3".
Tie Down Engineering Tire Carrier - 86092 - 241-86092F1
7/16" U-bolt design, accommodating 4 and 5 lug wheels. Fits 8" to 14" tires and most 15". Overall length 8-3/4" with a 3"thread length. Zinc plated. Fits all trailer frames up to 3".
Tie Down Engineering Tire Carrier - 86098 - 241-86098F1
Adjusts to fit 4 and 5 lug wheels up to 15". Fits all trailer frames up to 3" wide by 4" high. Extra heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86099 - 241-86099F1
Adjusts to fit 4 and 5 lug wheels up to 15". Fits all trailer frames up to 3" wide by 4" high. Extra heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86101 - 241-86101F1
Accommodates 4 and 5 lug wheels. Hot dip galvanized for lasting protection. Fits all trailer frames up to 3" wide by 4" high. Heavy-duty steel tubing.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50465 - 241-50465F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50470 - 241-50470F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50475 - 241-50475F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Wobble Roller Retainer With Washer - Packed Set For 1 Roller - 86252 - 241-86252F1
Replacement washers and clip rings for "wobble" roller bunk wheels. Set for one roller.
Tie Down Engineering Zinc Plated Quick Link - 50648 - 241-50648F1
Ideal for use with trailer chains. Zinc plated.
Tie Down Engineering Zinc Plated Quick Link - 50649 - 241-50649F1
Ideal for use with trailer chains. Zinc plated.
Tie Down Engineering Zinc Plated Roller Shaft - 86037 - 241-86037F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86038 - 241-86038F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86039 - 241-86039F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86041 - 241-86041F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal N Zinc - 86025 - 241-86025F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86024 - 241-86024F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86026 - 241-86026F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86027 - 241-86027F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86028 - 241-86028F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86029 - 241-86029F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86030 - 241-86030F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86031 - 241-86031F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86032 - 241-86032F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86033 - 241-86033F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86204 - 241-86204F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86205 - 241-86205F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86206 - 241-86206F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86207 - 241-86207F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86208 - 241-86208F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86209 - 241-86209F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86210 - 241-86210F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86211 - 241-86211F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86214 - 241-86214F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86215 - 241-86215F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86229 - 241-86229F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86230 - 241-86230F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86231 - 241-86231F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Mount Large At-5 Wht 100Pk - At-5-100 - 817-805900F1
Tie Mount Small At-3 Wht 100Pk - At-3-100 - 817-803900F1
Tie Plate 2 Sq Axle Replaces P/N 241-86538 Disc - 641-86538 - 641-86538 Superseded By: 641-K71G0169F1
Tiebar Kit, Single Cyl,End Mnt For Sale In Canada - Ho6001Em - 1-Ho6001Emf1
Tiedown 86510 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 3" - 86510 - 241-86510F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86511 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 3" - 86511 - 241-86511F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86512 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 4" - 86512 - 241-86512F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86513 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 4" - 86513 - 241-86513F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86514 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 5" - 86514 - 241-86514F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86515 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 5" - 86515 - 241-86515F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tigress 1000Cs Stainless Steel Cap. - 1000Cs - 397-1000Csf1
Fits all round plastic rod holder cupholders.
Tigress 66400 Straight Side Mount Rod Holder - 66400 - 397-66400F1
8-1/2" Straight Side Mount Transom Rod Or Console Rod Holder4 hole 3" x 4-1/2" brushed pad
Tigress 77275 Screwless 9" Rod Holder, 30° - 77275 - 397-77275F1
Combines sleek design with high durability, ideal for serious anglers seeking a clean, seamless look. Crafted from 316 stainless steel, it resists corrosion and stands up to harsh marine environments. Designed for a 2 1/8" cutout, it requires an installation wrench for a secure, screwless fit.
Tigress 77276 Screwless 9" Rod Holder 15° - 77276 - 397-77276F1
Combines sleek design with high durability, ideal for serious anglers seeking a clean, seamless look. Crafted from 316 stainless steel, it resists corrosion and stands up to harsh marine environments. Designed for a 2 1/8" cutout, it requires an installation wrench for a secure, screwless fit.
Tigress 77277 Screwless 9" Rod Holder, 0° - 77277 - 397-77277F1
Combines sleek design with high durability, ideal for serious anglers seeking a clean, seamless look. Crafted from 316 stainless steel, it resists corrosion and stands up to harsh marine environments. Designed for a 2 1/8" cutout, it requires an installation wrench for a secure, screwless fit.
Tigress 88144 Transom Mount 5-Rod Holder - 88144 - 397-88144F1
Constructed of cold drawn anodized aluminumIncludes white liners to protect your rod
Tigress 881441 Transom Mount 4-Rod Holder - 88144-1 - 397-881441F1
Constructed of cold drawn anodized aluminumIncludes white liners to protect your rod
Tigress 881491 Offset Triple Kite Rod Holder - 88149-1 - 397-881491F1
Triple offset can be used port or starboard Additional rod storage or for kite fishingConstructed of anodized aluminumTube ID 1-7/8" Base OD 1-1/2"
Tigress 881525 Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, White - 88152-5 - 397-881525F1
For 10" flared rod holders.
Tigress 881526 Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, Black - 88152-6 - 397-881526F1
For 10" flared rod holders.
Tigress 881528 Ring Top Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, Black - 88152-8 - 397-881528F1
Ring top liner for flared aluminum weld-on rod holders.
Tigress 881529 Ring Top Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, Black - 88152-9 - 397-881529F1
Ring top liner for flared aluminum weld-on rod holders.
Tigress 881572 Gs Five Rod Cluster - 88157-2 - 397-881572F1
Smaller, more compact than our original Five Banger Designed to increase your rod storage capacityConstructed of cold drawn high polished anodized aluminumFits standard rod holders
Tigress 88409 Xd Rod Holder Flag Pole, 72" - 88409 - 397-88409F1
Gimbal butt makes flying in any rod holder a breeze Made of anodized aluminumEasy to storeFits standard 1-5/8" rod holder
Tigress 88410 Xd Rod Holder Flag Pole, 42" - 88410 - 397-88410F1
Gimbal butt makes flying in any rod holder a breeze Gimbal butt makes flying in any rod holder a breezeMade of anodized aluminumEasy to storeFits standard 1-5/8" rod holder
Tigress 88411 Xd Rod Holder Flag Pole, 54" - 88411 - 397-88411F1
Gimbal butt makes flying in any rod holder a breeze Gimbal butt makes flying in any rod holder a breezeMade of anodized aluminumEasy to storeFits standard 1-5/8" rod holder
Tigress 88414 Shore Power Cord Holder - 88414 - 397-88414F1
The Tigress Shore Power Cord Holder is perfect for holding your shore power cord or hose while cleaning boat. 15° bent buttEasily stowable, portable, and great for travelAnodized aluminumFits standard 1-5/8" rod holders
Tigress 88415 Portable Cup Holder For Rod Holder, White - 88415 - 397-88415F1
Easily adjusts for 15 and 30 degree rod holdersKeeps your drinks readily availableAdd extra drink holders in an instant
Tigress 88440 Safety Tether, Lite - 88440 - 397-88440F1
Keep valuable fishing equipment tethered to boat UV Resistant Black Vinyl CoatingSS Snaps
Tigress 884401 Safety Tether, Heavy - 88440-1 - 397-884401F1
Keep valuable fishing equipment tethered to boat Keep valuable fishing equipment tethered to boatUV Resistant Black Vinyl CoatingSS Snaps
Tigress 88443 Xd Poseidon Dredge Boom, 7' - 88443 - 397-88443F1
Allows smaller center consoles to fish like bigger boats Outpulls any other dredge on the market7' black fiberglass boom3/0 Folbe heavy-duty block pulley14' nylon safety tether with 316 stainless steel carabinerIdeal for LP or Hooker electric reels316 stainless steel hardware
Tigress 884431 Xd Poseidon Dredge Boom Kit - 88443-1 - 397-884431F1
50 yards of 400lb Momoi Outrigger Mono 500 lb stainless dredge dog swivel29 mm Harken Carbo Air Block2" spring gate snapSleeve crimps
Tigress 88502 Gunnel Mount Outrigger Holder, Cast 316 Stainless, 1-1/8" - - 397-88502F1
Gunnel mount outrigger holder.
Tigress 88522 Swivel Base Gunnel Rod Holder W/0° Oval Head, 10-1/2" L - 88522 - 397-88522F1
Gunnel mount rod holder.
Tigress 88522Sm Swivel Base Gunnel Rod Holder W/0° Rectangular Head, 10-1/2" L - 88522Sm - 397-88522Smf1
Gunnel mount rod holder.
Tigress 88524 Swivel Base Gunnel Rod Holder W/15° Oval Head, 10-1/2" L - 88524 - 397-88524F1
Gunnel mount rod holder.
Tigress 88524Sm Swivel Base Gunnel Rod Holder W/15° Rectangular Head, 10-1/2" L - 88524Sm - 397-88524Smf1
Gunnel mount rod holder.
Tigress 88525 30° Oval Head Gunnel Rod Holder - 88525 - 397-88525F1
Oval gunnel rod holder.
Tigress 885251 Medium Backing Plate - 88525-1 - 397-885251F1
For select Tigress flush mount rod holders.
Tigress 88527 0° Oval Head Gunnel Rod Holder - 88527 - 397-88527F1
Oval gunnel rod holder.
Tigress 88529 15° Oval Head Gunnel Rod Holder - 88529 - 397-88529F1
Oval gunnel rod holder.
Tigress 885303 Universal Backing Plate - 88530-3 - 397-885303F1
For select Tigress flush mount rod holders.
Tigress 88586 Weld-On Large Stainless Steel Cup Insert - 88586 - 397-88586F1
Fits 20oz and 30oz Tumblers. Designed to be welded on to aluminum towers.
Tigress 88601 Deluxe Outrigger Rigging Kit - 88601 - 397-88601F1
Pair of high impact release clips Pair of 1-1/4" cork stopsPair of glass ring snubbersPair of eye straps with screws4 leader snaps
Tigress 886081 All Purpose Kite - 88608-1 - 397-886081F1
Sturdy and dependable, the Tigress All Purpose Kite will fly steady in 10-15 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds. Lightweight spars are constructed of 100% carbon graphiteIncludes extra 5th spar
Tigress 886101 Center Rigger Kit - 88610-1 - 397-886101F1
High impact release clip 1-1/4" cork stopGlass ring snubberEye strap with screws2 leader snaps30' of black nylon braid
